One Ball Brosses - Wax
3 "x 5" used to remove the old wax from the base and add structure to the base.
Brass:
Brass:
Brass brushes are generally used to brush oxidized basic materials, dirt and old wax of the base surface before waxing it.
Nylon/Brass:
This brush has brass and nylon hair. Indispensable after each waxing with hot wax for maximum speed! First use the brass side to slightly clean the base, then brush with the nylon to remove excess wax and polish the base.
Horsehair:
The best brush to use most of the time to remove excess wax and polish the base.
Nylon:
Use to remove harder wax after scraping and the first step to polish the base. Then use a horse horsehair brush.
Instructions :
1. Choose the FART specific to the appropriate temperature by checking the conditions of the mountain/the ratio on the snow (actual temperature of snow, not air).
2. Press the Fart on the iron and distribute small drops of Fart over the entire base. Do not let the smoking iron!
3. The iron in hand, pull slowly on the wax drops by smoothing them to form a wax sheet which covers the whole base, from point to tail.
4. Let the wax cool for 10 to 15 minutes, then scratch it with a sharp plastic scraper. Do not use a steel scraper.
5. Using a wax brush or a fiber stamp, remove the excess wax from the base, brushing from the tip to the tail. This allows the base to slide quickly.
